Bob's Machine Shop
Bob's Machine Hydraulic Action Series Kick-Back Jack Plate
$1,900.00
USD
Free Shipping
The Bob's Machine Hydraulic Action Series Kick-Back Jack Plate lets you raise your outboard from the helm to run and idle through skinny water, and it helps protect your lower unit if you do hit something. If the motor strikes…
Read more →Authorized Bob's Machine Shop Dealer
Genuine products · Full manufacturer warranty
Free shipping on every order, no minimum
Manufacturer warranty included
Expert support 7 days a week
Key Features:
Patented hydraulic Kick-Back design helps protect your lower unit
Choice of 4" or 6" setback, both with 7.5" total lift (6" hydraulic + 1.5" built in)
Rated for outboards up to 150 HP, standard BIA bolt pattern
30° kick-up range
No chains or springs
Delrin rollers, bushings and bearings for smooth operation
Greaseable pivot points (zerk fittings)
Locking pins for reverse and trailering
Motor tether attachment point
Available in Silver or gloss Black Powder Coat
Made in the USA by Bob's Machine Shop
Patented hydraulic Kick-Back design helps protect your lower unit
Choice of 4" or 6" setback, both with 7.5" total lift (6" hydraulic + 1.5" built in)
Rated for outboards up to 150 HP, standard BIA bolt pattern
30° kick-up range
No chains or springs
Delrin rollers, bushings and bearings for smooth operation
Greaseable pivot points (zerk fittings)
Locking pins for reverse and trailering
Motor tether attachment point
Available in Silver or gloss Black Powder Coat
Made in the USA by Bob's Machine Shop
| Warranty | Limited lifetime structure warranty + 3-year Action pump warranty |
| Dimensions | Setback: 4" or 6" | Hydraulic stroke: 6" | Built-in lift: 1.5" | Total lift: 7.5" | Tilt: 30° |
| Weight | 48 |
| Compatibility | Outboards up to 150 HP with the standard BIA bolt pattern |
| Installation | Bolts to the transom using the standard BIA bolt pattern, and the outboard then mounts to the plate. The outboard must be safely lifted and supported during installation and all hardware torqued to spec, so we recommend installation by a qualified marine technician. An optional clamp-on style kit (P/N 100-105001) is available for clamp-on motors. |
| Vendor | Bob's Machine Shop |
| SKU | BOB100105100P |
| Availability | In Stock |
What horsepower is this Kick-Back Jack Plate rated for?
It is rated for outboards up to 150 HP with the standard BIA bolt pattern.
Should I choose the 4" or 6" setback?
Both have the same lift and horsepower rating. The 4" keeps the engine closer to the transom for a more compact install, while the 6" moves it further back into cleaner water, which can help top speed and holeshot on some hulls. If you're unsure, check your boat manufacturer's recommendation or contact us with your boat and engine details.
How does the Kick-Back feature work?
If your lower unit hits a submerged object while moving forward, the plate pivots up (up to 30°) so the motor can ride over it, then settles back into place. There are no chains or springs. Bob's Machine Shop rates it for impacts at 5 MPH or less, in forward only.
Will it kick up in reverse or on the trailer?
No. Built-in locking pins hold the plate in place when backing up and trailering. The Kick-Back is not designed to take impacts while running in reverse.
How much lift does it give?
6" of hydraulic stroke plus 1.5" of lift built into the structure, for 7.5" of total lift.
What's the difference between the Silver and Black Powder Coat finishes?
Nothing but the look. Both use the same plate and specs; the gloss black powder coat matches black outboards and rigging.
What maintenance does it need?
Very little. Delrin rollers, bushings and bearings keep it moving smoothly, and the pivot points take grease through standard zerk fittings. Rinse with fresh water after saltwater use.
What is the warranty?
Bob's Machine Shop covers the structure with a limited lifetime warranty against manufacturing defects, and the Action pump with a 3-year warranty.
It is rated for outboards up to 150 HP with the standard BIA bolt pattern.
Should I choose the 4" or 6" setback?
Both have the same lift and horsepower rating. The 4" keeps the engine closer to the transom for a more compact install, while the 6" moves it further back into cleaner water, which can help top speed and holeshot on some hulls. If you're unsure, check your boat manufacturer's recommendation or contact us with your boat and engine details.
How does the Kick-Back feature work?
If your lower unit hits a submerged object while moving forward, the plate pivots up (up to 30°) so the motor can ride over it, then settles back into place. There are no chains or springs. Bob's Machine Shop rates it for impacts at 5 MPH or less, in forward only.
Will it kick up in reverse or on the trailer?
No. Built-in locking pins hold the plate in place when backing up and trailering. The Kick-Back is not designed to take impacts while running in reverse.
How much lift does it give?
6" of hydraulic stroke plus 1.5" of lift built into the structure, for 7.5" of total lift.
What's the difference between the Silver and Black Powder Coat finishes?
Nothing but the look. Both use the same plate and specs; the gloss black powder coat matches black outboards and rigging.
What maintenance does it need?
Very little. Delrin rollers, bushings and bearings keep it moving smoothly, and the pivot points take grease through standard zerk fittings. Rinse with fresh water after saltwater use.
What is the warranty?
Bob's Machine Shop covers the structure with a limited lifetime warranty against manufacturing defects, and the Action pump with a 3-year warranty.
Why buy from Tidal Standard
Every purchase is backed by our quality guarantee.
Manufacturer Warranty
All systems come with a full manufacturer warranty. Coverage varies by brand and product — contact us for details.
Free Shipping
Free shipping on all orders. Large systems ship via freight with white-glove delivery available.
Expert Support
Our specialists are available 7 days a week to help with selection, installation, and setup.